Transmission Position Sensor/Switch: Adjustments

1. Shift to the P position, and loosen the nuts.
2. Slide the switch in the direction of D4 or D position [within 2.0 mm (0.079 in.)] so that there is continuity between the No. 1 and No. 7 terminals in the range of free play of the shift lever.
3. Recheck for continuity between each of the terminals.

NOTE:
- If adjustment is not possible, check for damage to the shift lever detent and/or the bracket.
- If there is no damage, replace the console switch.
- The engine should start when the shift lever is in position N in the range of free play.