Removal and Installation

1. Remove the driver's dashboard lower cover, the glove box and the center dashboard lower cover .
2. Disconnect the air mix control cable from the heater unit.
3. Remove the rear window defogger switch, the hazard warning switch and the audio unit.




4. Disconnect the connectors from the heater control panel. Remove the five self-tapping screws and the center panel together with the heater control panel.

NOTE: The locking tabs are on the bottom of the connectors.




5. Remove the four self-tapping screws and the heater control panel.
6. Install in the reverse order to removal. Adjust the air mix control cable and the heater valve cable .