Manual Transmission/Transaxle: Service Precautions

NOTE:
- This transmission uses no gaskets between the major housings; use liquid gasket (P/N 08718 - 0001).
- Always clean the magnet whenever the transmission housing is disassembled.
- Inspect all the bearings for wear and operation.

NOTE: The 3rd, 4th, and 5th gears are installed with a press. Prior to reassembling, clean all the parts in solvent, dry them, and apply lubricant to any contact surfaces. The 3rd, 4th, and 5th gears, however, should be installed with a press before lubricating them.