Wiper Motor: Service and Repair

1. Open the hood, then remove the cap nuts and carefully remove the wiper arms so they don't hit the hood.

Wiper Motor Replacement:

2. Remove the hood seal and the cowl cover by prying out their trim clips.
3. Disconnect the 5P connector from the wiper motor, then remove the wiper harness from the wiper linkage.

Wiper Motor Replacement:

4. Remove the wiper linkage assembly by removing the four mounting bolts.

Wiper Motor Replacement:

5. Remove the three mounting bolts and one nut from the wiper linkage, and then remove the wiper motor.
6. Install in the reverse order of removal.