Replacement

REMOVAL
1. Remove the left.
2. Remove the exhaust pipe.
3. Disconnect the air cleaner duct, and move it toward the shock tower side.
4. Remove the distributor cover.





5. Remove the shift cable bracket.





6. Remove the harness bracket, then disconnect the ATTS unit cooler hoses.





7. Disconnect the ATTS unit sub harness connector.
8. Support the ATTS unit with the jack.
9. Loosen the flange bolt.
10. Remove the flange bolts, then lower the ATTS unit a little.
11. Disconnect the breather hose, then remove the ATTS unit.





12. Remove the extension tube and shaft.

INSTALLATION
1. Install the extension tube and shaft.
2. Raise the ATTS unit with a jack.
3. Connect the breather hose and to the ATTS unit.





4. Route the ATTS unit cooler hoses, and install the ATTS unit.





5. Connect the ATTS unit sub harness connector.





6. Connect the ATTS unit cooler hoses, then install the harness bracket.





7. Install the shift cable bracket.
8. Install the distributor cover.
9. Connect the air cleaner duct.
10. Install the exhaust pipe.
11. Install the left driveshaft.
12. Perform the ATTS function test.