Suspension

Wheel alignment	Camber	Front		0 deg 00' +/- 1 deg
		Rear		-0 deg 30' +/- 1 deg
	Caster	Front		2 deg 48' +/- 1 deg
	Total toe	Front		0 +/- 2 mm
		Rear		IN 2 +/- 2
	Front wheel turning angle	Inside wheel		38 deg 32' +/- 2 deg
		Outside wheel		31 deg 03' (Reference)
Aluminum wheel	Runout	Axial	Standard or new	0 - 0.7 mm
			Service limit	2.0 mm
		Radial	Standard or new	0 - 0.7 mm
			Service limit	1.5 mm
Steel wheel	Runout	Axial	Standard or new	0 - 1.0 mm
			Service limit	2.0 mm
		Radial	Standard or new	0 - 1.0 mm
			Service limit	1.5 mm
Wheel bearings	End play	Front		0 - 0.05 mm
		Rear		0 - 0.05 mm