Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2000 >> S2000 L4-1997cc 2.0L DOHC (VTEC) MFI >> Repair and Diagnosis >> Cruise Control >> Cruise Control Switch >> Testing and Inspection >> Set/Resume Switch
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Set/Resume Switch

Set/Resume Switch Test




1. Remove the two screws securing the set/resume switch, then remove the switch.
2. Disconnect the connector from the switch.
3. Check the set switch for continuity between the No.3 and No.5 terminals of the connector. There should be continuity while pressing the switch down, and no continuity when the switch released.
4. Check the resume switch for continuity between the No.1 and No.3 terminals of the connector. There should be continuity while pressing the switch down, and no continuity when the switch released.
5. If either switch is faulty, replace the switch assembly.
6. If switch is OK, but switch failure is occurred on the cruise control unit input test, check and repair the wire harness on the switch circuit.
pro multis · About Operation CHARM