Part 6 of 7
| A/T differential carrier | Pinion shaft contact area I.D. | Standard or new | 18.00 - 18.025 mm | |
| Carrier-to-pinion shaft clearance | Standard or new | 0.013 - 0.054 mm | ||
| Service limit | 0.1 mm | |||
| Drive shaft contact area I.D. | Standard or new | 28.015 - 28.045 mm | ||
| Carrier-to-driveshaft clearance | Standard or new | 0.035 - 0.086 mm | ||
| Service limit | 0.12 mm | |||
| Intermediate shaft contact I.D. | Standard or new | 28.015 - 28.045 mm | ||
| Carrier-to-intermediate shaft clearance | Standard or new | 0.065 - 0.111 mm | ||
| Service limit | 0.12 mm | |||
| Carrier bearing starting torque (preload) | For new bearing | Standard or new | 2.7 - 3.9 Nm | |
| Service limit | Adjust | |||
| For bearing reused | Standard or new | 2.5 - 3.6 Nm | ||
| Service limit | Adjust | |||
| Final driven gear backlash | (references) | Standard or new | 0.087 - 0.146 mm | |
| Service limit | 0.2 mm | |||
| A/T differential pinion gear | Backlash | Standard or new | 0.05 - 0.15 mm | |
| I.D. | Standard or new | 18.042 - 18.066 mm | ||
| Pinion gear-to-pinion shaft clearance | Standard or new | 0.055 - 0.095 mm | ||
| Service limit | 0.12 mm |