Shift Solenoid: Service and Repair

Shift Solenoid Valves A and B Replacement

NOTE: Shift solenoid valves A and B must be removed/ replaced as an assembly.

1. Remove the harness clamp (c) form the clamp bracket (D).





2. Remove the mounting bolts and the shift solenoid valves A and B.
3. Clean the mounting surface and fluid passage.
4. Install a new shift solenoid valves A and B with a new filter/gasket (E), and install the harness clamp on the clamp bracket.
5. Check the connector for rust, dirt, or oil, then reconnect the connector securely.