Trunk / Liftgate: Adjustments
Adjustment1. Remove the support strut from each side.
2. Loosen each bolt and nut slightly.
3. Adjust the tailgate (A) alignment in the following sequence.
- Pull down the rear portion of the headliner. Take care not to bend the headliner excessively. Adjust the tailgate hinges (B) right and left, as well as forward and rearward, using the elongated holes.
- Turn the tailgate edge cushions (C), in or out as necessary, to make the tailgate (D) fit flush with the body at the side edges.
- Adjust the fit between the tailgate and tailgate opening by moving the striker (E).
4. Tighten each bolt and nut securely.
5. Check that the tailgate opens properly and locks securely.
6. Reinstall the support struts securely.
7. Apply body paint to the hinge mounting nuts and around the hinges.
8. Apply multipurpose grease to the pivot portion of the tailgate hinges (A) as indicated by the arrows.