Use of the Repair Material (Reference)

Use of the Repair Material (reference)

NOTE: Follow the materials manufacturer's instructions.

The use of a special polyester putty for PP bumper is described here:




1. Filler Mixing Ratio:
2. Sanding filler
Spray the bumper primer on the area where the PP material was used.




3. Primer surfacer
The primer surfacer is used to protect the PP resin surface and fill cavities or flaws before the intermediate coat and top coat.

Use the 2-component type primer surface (gray).




4. Intermediate coat and top coat

Use a 2-part polyester urethane top coat.
Top coat is also used for an intermediate coat.

NOTE: Mix only an amount that can be used before it hardens.