Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Controller Test

Dash Lights Brightness Controller

Controller Test

1. Before testing the controller, do the control unit input test.

2. Remove the gauge assembly (A).
3. Disconnect the 30P connector (B).
4. At the gauge assembly 30P connector A, measure resistance between the No. 19 and No. 18 terminals while rotating the adjusting dial. Resistance should vary from 0 to 20,000 Ohms as the dial is rotated.
5. If the resistance is not as specified, replace the gauge assembly.