Flywheel Replacement
Clutch ReplacementSpecial Tools Required
^ Clutch alignment shaft 07LAF-PT00110
^ Clutch alignment disc 07JAF-PM7011A
^ Remover handle 07936-3710100
^ Ring gear holder 07LAB-PV00100 or 07924-PD20003
^ Attachment, 57 x 40 mm 07746-0010200
^ Driver 077 49-0010000
Flywheel Replacement
NOTE: Do not disassemble the flexible plate from the flywheel.
1. Install the special tool.
2. Remove the flywheel mounting bolts in a crisscross pattern in several steps, then remove the flywheel.
3. Remove the pilot bearing (A) from the flywheel (B).
4. Drive the new bearing into the flywheel using the special tools as shown. Apply a light coat of oil to the outside of the bearing surface.
5. Align the hole in the flywheel with the crankshaft dowel pin, and install the flywheel. Install the mounting bolts finger-tight.
6. Install the special tool, then torque the flywheel mounting bolts in a crisscross pattern in several steps.