Trunk / Liftgate Spring: Service and Repair
Trunk Lid Torsion Bar ReplacementSpecial Tools Required
Torsion bar assembly tool 07AAF-SNAA100
NOTE: Put on gloves to protect your hands.
1. Remove the torsion bars (A) from the torsion bar center clip (B).
2. Use the torsion bar tool to remove the torsion bars from both trunk lid hinges. First remove the left torsion bar (A), then remove the right torsion bar (B).
3. Remove the torsion bar canter clip from the body.
4. Install the torsion bars in the reverse order of removal, and note these items:
- The shapes of the left torsion bar (A) and right torsion bar (B) are shown. Install the torsion bars properly.
- Adjust the torsion bars forward or rearward with the torsion bar assembly tool. The standard torsion bar positions are:
Left torsion bar: Higher tension
Right torsion bar: Normal position
- Make sure the trunk lid opens properly and locks securely.