Lower Side Moulding / Trim: Service and Repair

Door Molding Replacement

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program

NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Be careful not to pry too far or you may bend the molding.
- Put on gloves to protect your hands.

1. Prepare to release the molding clips from inside the vehicle:
- To remove the front door molding, remove the front door panel and plastic cover.
- To remove the rear door molding, remove the rear door panel and plastic cover.




2. Release the clips (A) and gently pry the front door molding (B) or rear door molding (C) away from the door while separating the adhesive tape (D, E, F).
3. Install the moldings in the reverse order of removal, and check for damaged or stress-whitened clips, and replace them with new ones and adhesive tape.