Door Lock Switch Test

Door Lock Switch Test

1. Remove the door panel.
- 2-door
- 4-door




2. Remove the two mounting screws and the door lock switch.
3. Check for continuity between the terminals.
- There should be continuity between the No. 1 and No. 2 terminals when the door lock switch is in the LOCKED position and no continuity in the neutral position.
- There should be continuity between the No. 2 and No. 3 terminals when the door lock switch is in the UNLOCKED position and no continuity in the neutral position.

4. If the continuity is not as specified, replace the switch.