Procedures

Shift Lever Trim Removal Installation

NOTE:
- Put on gloves to protect your hands.
- Do not pry the panel surface with a flat-tip screwdriver, to prevent damage.
- Take care not to scratch the dashboard and related parts.

1. Remove these items:
- Center lower cover
- Woofer, for some models




2. M/T model: Remove the shift knob (A).




3. Using the handle end of a hammer (A), carefully insert the handle through the center lower cover opening, and push on the back side of the shift lever trim (B) to start to release the clips.




4. Pull out the shift lever trim (A) to release the remaining clips (B), hooks (C), and disconnect hazard warning switch connector (D).
5. Install the panel in the reverse order of removal, and note these items:
- Make sure each connector is plugged in properly.
- Push the clip and hook portions into place securely.