Trunk / Liftgate Lock Cylinder: Service and Repair

Hatch Lock Cylinder Replacement

NOTE: Put on gloves to protect your hands.

1. Remove the hatch trim panel.




2. Disconnect the cylinder rod (A), and remove the bolts securing the hatch lock cylinder (B).




3. Turn the lock cylinder (A) 45 °, and pull it out.
4. If necessary, on the outside of the hatch, remove the lock cylinder seal (B).
5. Install the lock cylinder in the reverse order of removal, and note these items.
- Make sure the cylinder rod is connected properly.
- Make sure the hatch opens properly and locks securely.