Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2005 >> Element 2WD L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Testing and Inspection >> Component Tests and General Diagnostics >> Non-Trouble Code Procedures >> Stall Speed Test
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Stall Speed Test

Stall Speed Test
1. Set the parking brake, and block all four wheels.





2. Connect the HDS to the DLC (A), and go to the A/T data list.
3. Make sure the A/C switch is OFF.
4. After the engine has warmed up to normal operating temperature (the radiator fan comes on), shift to the 2 position.
5. Firmly press the brake pedal and accelerator for 6 to 8 seconds, and note engine speed. Do not move the shift lever while raising engine speed.
6. Allow 2 minutes for cooling, then repeat the test in the D, 1, and R positions.

NOTE:
^ Do not test stall speed for more than 10 seconds at a time.
^ Stall speed tests should be used for diagnostic purposes only.
^ Stall speed should be the same in D, 2, 1, and R positions.
^ Do not test stall speed with the A/T pressure gauges installed.

Stall Speed rpm:
Specification: 2,100 rpm
Service Limit: 1,950 - 2,250 rpm





7. If the measurements are out of the service limit, problems and probable causes are listed in the table:

pro multis · About Operation CHARM