Driver's Pocket

Driver's Pocket Removal Installation

NOTE:
- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.




1. Reach under the dashboard, and push on lock tabs (A) to release the cruise control main switch (B), then remove the switch and disconnect the connector (C).
2. Reach through the cruise control switch hole and push on lock tab (D) and remove the switch lid (E).




3. From under the dash, remove the screws (A, B) securing the driver's pocket (C).
4. While pulling out on the bottom edge of the dashboard (D), remove the pocket.
5. Install the pocket in the reverse order of removal, and make sure the switch connector is plugged in properly.