System Diagram

Differential Reassembly





Install the rear differential mount assembly A to the rear differential assembly (B)





Install the 30 mm shim (A), the 6 x 1.0 mm dowel pins (B), and the torque control differential case (C). Torque the eight mounting bolts in a crisscross pattern in several steps





Install the special tools to the companion flange, then tighten the new locknut to specified torque





Install the drain plug (A) and the oil filler plug (B) with new washers (C)





Install the rear differential mount assembly A to the rear differential assembly (B)





Install the rear differential mount assembly mounting bolts.





Install the right and left rear differential mount brackets B. then torque the bolts (A) and rear differential damper (C).





Install the No. 2 propeller shaft (A) onto the rear differential (B) by aligning the reference marks (C) made during removal. Make sure you use new mounting bolts (D).





Install the tail pipe