Differential Housing Assembly Removal and Installation

Differential Housing Assembly Removal and Installation





1. Remove the six mounting bolts in a crisscross pattern in several steps, then remove the differential housing assembly (A) and oil seals (B).





2. Remove the dirt and oil from the sealing surfaces. Apply liquid gasket (P/N 08718-0001) to the sealing surface. Make sure you seal the entire circumference of the bolt holes to prevent oil leakage.





3. Install the differential housing assembly (A), then torque the six mounting bolts (B) in a crisscross pattern in several steps.
4. Install the oil seals.