B1106

DTC B1106: Door Multiplex Control Unit Lost Communication with MICU

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.
2. Turn the ignition switch OFF, and then back ON (II).
3. Wait for 6 seconds or more.
4. Check for DTCs with the HDS.

Is DTC B1106 indicated?

YES - Go to step 5.

NO - Intermittent failure. The system is OK at this time. Check for loose or poor and connections.

5. Check for DTCs with the HDS.

Are DTC B1055, B1157, B1255, B1355, 07556, B1806, B1955, B2005, and 62055 also indicated?

YES - Go to the MICU input test. Component Tests and General Diagnostics

NO - Go to the door multiplex control unit input test. Component Tests and General Diagnostics