B2011

DTC B2011: Left Power Sliding Door Control Unit Lost Communication with Gauge Control Module (A/T Message)

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.
2. Turn the ignition switch OFF, and then back ON (II).
3. Wait for 6 seconds or more.
4. Check for DTCs with the HDS.

Are DTC B1008, B1061, B1808, B1956, B2011, and B2061 indicated?

YES - Go to gauge control module input test. Component Tests and General Diagnostics

NO - Go to left power sliding door control unit input test. Component Tests and General Diagnostics