DTC 65

DTC 65: Brake Fluid Level
1. Check the brake fluid level.
Is the level correct?
YES-Go to step 2.
NO-Refill the brake fluid, and recheck.
2. Disconnect the brake fluid level switch and clear the DTC. Check for DTC 65.
Did DTC 65 return?
YES-Go to step 3.
NO-Replace the brake fluid level switch.
3. Check for short in the RED/YEL wire between the gauge control unit and the brake fluid level switch. If OK, check the brake fluid level switch.
Is the switch OK?
YES-Check for loose terminals in the VSA control unit 47P connector. If necessary, substitute a known-good VSA modulator-control unit, and recheck.
NO-Replace the brake fluid level switch.