Open/Close Function of the Display Does Not Work
OPEN/CLOSE function of the display does not work1. Turn the ignition switch OFF.
2. Disconnect the navigation display connector B (10P) and CD changer 18P connector.
3. Check for continuity between navigation display connector B (10P) terminal No. 10 and body ground.
Is there continuity?
YES - Repair short in the wire between navigation display connector B (10P) terminal No. 10 and CD changer.
NO - Go to step 4.
4. Substitute a known-good navigation display, and check to see if the display opens and closes normally.
Does the display work normally?
YES - Replace the navigation display.
NO - Replace the CD changer.