Floor Well Cover Lock Cylinder Replacement
Floor Well Cover Lock Cylinder ReplacementSpecial Tools Required
KTC trim tool set SOJATP2014
NOTE:
- Take care not to scratch the floor well cover.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Remove the floor well cover.
2. Remove the screws and lock handle (A).
3. Remove the screws and lock handle cover (A).
4. Release the hooks (A), then remove the lock cylinder cover (B).
5. Using a trim tool, remove the retainer (A), then remove the floor well cover lock cylinder (B).
NOTE: Wear eye protection during this step.
6. Insert the retainer into the lock body, then push the lock cylinder into the lock cylinder body unit it snaps into the retainer.
7. Install the lock and lock handle in the reverse order of removal.