Clearing Diagnostic Trouble Codes

Canceling the DTC Indication

- Turn the ignition switch OFF or
- Press the MEMO button, or position button 1, or position button 2, or
- Press one of the seat adjustment switches.

Erasing the DTC from Memory
Turn the ignition switch OFF. Rise the front and rear of the driver's seat to the highest position. Disconnect the gray seat harness connectors C901 (12P) and C902 (10P) from the seat floor harness. Wait one minute and then plug them back in.

Erasing the Driving Position from Memory
1. Press and hold all three driving position memory switch buttons.
2. Turn the ignition switch ON (II).
3. Continue to hold all three driving position memory switches for more than 5 seconds, and release them in less than 10 seconds.
4. The buzzer will sound for 500 ms to confirm that all driving position data is erased.