Reading Diagnostic Trouble Codes

Displaying the Diagnostic Trouble Code (DTC)

1. Turn the ignition switch OFF, and move the seat to a non-memorized position.




2. Press and hold the MEMO button (A) and both position buttons (B) at the same time.
3. Turn the ignition switch ON (II), and wait at least 1 second, then release the three Buttons.
4. After 1 second, the position button indicators (C) will blink to show the DTC.

DTC Indications

No System Problem




If there is no DTC stored, the indicators blink only once (3 seconds).

System Problem




If a system problem occurs and a DTC is stored, the indicators will show the DTC. The first digit is indicated by the number of long (1 second) blinks, and the second digit is indicated by the number of short (0.26 second) blinks. There is a 3 second break between each DTC when there are multiple DTCs.