Rocker Arm and Shaft Disassembly/Reassembly

Rocker Arm and Shaft Disassembly/Reassembly
J35A6 Engine





NOTE:
- Identify parts as they are removed. If they are to be reused, they must be reinstalled in their original locations.
- Inspect the rocker shafts and rocker arms.
- When removing or installing the rocker arm assembly, do not remove the rocker shaft mounting bolts. The bolts will keep the springs and rocker arms on the shaft.
- Bundle the intake rocker arms with rubber bands to keep them together as a set.
- Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points.
- When replacing the intake rocker arm assembly, remove the packaging hardware from the new intake rocker arm assembly.

J35A7 Engine








NOTE:
- Identify parts as they are removed. If they are to be reused, they must be reinstalled in their original locations.
- Inspect the rocker shafts and rocker arms.
- When removing or. installing the rocker arm assembly, do not remove the rocker shaft mounting bolts. The bolts will keep the springs, rocker shaft, and rocker shaft bridge on the shaft.
- Bundle the intake rocker arms with rubber bands to keep them together as a set, and remove it after intake rocker arm has been installed.
- Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points.
- When replacing rocker arm assemblies, remove the packaging hardware from the rocker arm assembly.