PAX System - Warning Reset, Service Manual Revision

SOURCE:
Honda Service News December 2004

TITLE:
S/M Fix: Reset PAX System Warning, 2005 Odyssey

APPLIES TO:
2005 Odyssey

SERVICE TIP:
The steps for the PAX system warning reset procedure on page 18-82 of the 2005 Odyssey S/M are wrong. Cross them out, and use these steps instead:

1. To put the gauge control module into the self-diagnostic mode:

- Turn the headlight switch to ON.

- Press and hold the SELECT/RESET (instrument panel brightness) knob.

- Turn the ignition switch to ON (II).

- Within 5 seconds, turn the headlights to AUTO, then to ON, and then to AUTO again.

- Within 5 seconds, release the SELECT/ RESET knob, then push and release the knob three times.

2. Once the gauge control module is in the self-diagnostic mode, press and hold the INFO button on the steering wheel for 5 seconds to get to the CUSTOMIZE MENU.

3. Use the INFO button to scroll through to the PAX RESET screen, then press the SEL/RESET button on the steering wheel.

4. Use the INFO button to scroll to the appropriate wheel, and then press the SEL/RESET button on the steering wheel to reset the PAX warning system display. The screen should read PAX RESET COMPLETED. Repeat this step for each wheel that needs to be reset.

5. Use the INFO button to scroll through to EXIT, then press the SEL/RESET button.

6. Turn the ignition switch to OFF to exit the self-diagnostic mode.