Shift Solenoid Valve C Replacement
Shift Solenoid Valve C Replacement1. Get the customer's radio anti-theft code (navigation code), and write down the radio station presets.
2. Disconnect the battery negative terminal, then disconnect the battery positive terminal.
3. Remove the battery hold-down bracket, then remove the battery cover, battery, and battery tray.
4. Remove the intake air duct and air cleaner housing.
5. Loosen the two bolts securing the rear of the battery base, and remove the two bolts securing the front of the base, then remove the battery base.
6. Disconnect shift solenoid valve C connector, and remove shift solenoid valve C.
7. Install a new shift solenoid valve C with new O-rings (A). While installing the solenoid valve, do not allow dust or other foreign particles to enter the transmission.
8. Check the connector for rust, dirt, or oil, then connect the connector.
9. Install the battery base, then install the air cleaner housing and intake air duct.
10. Install the battery tray, battery, and battery cover, then secure the battery with its hold-down bracket.
11. Enter the radio code (navigation code), reset the radio presets and set the clock.
12. Do the power window control unit reset procedure.