4th Clutch Transmission Fluid Pressure Switch Replacement

4th Clutch Transmission Fluid Pressure Switch Replacement
1. Lift the vehicle up on a lift or apply the parking brake, block the rear wheels, and raise the front of the vehicle. Make sure it is securely supported.
2. Remove the splash shield.





3. Disconnect the connector from the 4th clutch transmission fluid pressure switch (A).
4. Install the new switch with a new sealing washer (B). Tighten the switch on the metal part, not the plastic part.
5. Check the connector for water, oil, dust, or other particles inside it, and connect the connector securely.
6. Install the splash shield and lower the vehicle.