Crankshaft, Engine
CrankshaftMain journal diameter 71.976 - 72.000 mm (2.8337 - 2.8346 inch)
Rod journal diameter 71.976 - 72.000 mm (2.8337 - 2.8346 inch)
Rod/main journal taper
Standard or New 0.005 mm (0.0002 inch) maximum
Service Limit 0.010 mm (0.0004 inch)
Rod/main journal out-of-round
Standard or New 0.005 mm (0.0002 inch) maximum
Service Limit 0.010 mm (0.0004 inch)
End play
Standard or New 0.10 - 0.36 mm (0.004 - 0.014 inch)
Service Limit 0.45 mm (0.018 inch)
Runout
No.1, 4 journal
Standard or New 0.020 mm (0.0008 inch) maximum
Service Limit 0.03 mm (0.0012 inch)
No2, 3 journals
Standard or New 0.025 mm (0.0010 inch) maximum
Service Limit 0.03 mm (0.0012 inch)
Main Bearing Cap Bolts
Install the bearings (A) and bearing caps (B) with the arrow (C) facing the timing belt end of the engine.
Torque the bearing cap bolts to 74 Nm (7.5 kgf-m, 54 ft. lbs.), and the bearing cap side bolts to 49 Nm (5.0 kgf-m, 36 ft. lbs.).