Park Pin Switch Test
Park Pin Switch Test1. Remove the driver dashboard lower cover.
2. Disconnect D3 switch/park pin switch/A/T gear position indicator panel light connector.
3. Check for continuity between D3 switch/park pin switch/A/T gear position indicator panel light connector terminals No. 2 and No. 6 with the shift lever is in the P position, and with the shift lever out of the P position.
4. There should be no continuity when the shift lever is in the P position, and there should be continuity when the shift lever in any position other than P.
5. If the park pin switch is OK, connect the connector and install the driver dashboard lower cover. If the switch is faulty, replace the park pin switch.