DTC 61
DTC 61: IG2 Voltage1. Check the R/C MIRROR (7.5 A) fuse in the driver's under-dash fuse/relay box.
Is the fuse OK?
YES - Reinstall the fuse, and go to step 2.
NO - Replace the fuse, and recheck.
2. Clear the DTC using the HDS.
3. Test-drive the vehicle.
Does the ABS indicator come on, and is DTC 61 indicated?
YES - Go to step 4.
NO - The system is OK at this time.
4. Turn the ignition switch OFF.
5. Disconnect the ABS control unit 31P connector.
6. Turn the ignition switch ON (II).
7. Measure the voltage between the ABS control unit 31P connector terminal No. 15 and body ground.
Is there battery voltage?
YES - Replace the ABS modulator-control unit.
NO - Repair open in the wire between the ABS control unit and the R/C MIRROR (7.5 A) fuse in the driver's under-dash fuse/ use/relay box.