Start-Up Procedure and Diagnosis Menu
Start-up procedure and Diagnosis Menu1. Turn the ignition switch ON (II), select "OK" on the disclaimer screen, then press and hold the buttons in this order: (1) MENU button, (2) MAP/GUIDE button, (3) CANCEL button, and keep them pressed simultaneously for 5 seconds.
2. After the display changes to the diagnosis menu screen, select the item you want to check, and the check will start. To return to the previous screen, select "RETURN" on the screen.
- System Links
- Tire Calibrate
- Monitor Check
- Yaw Rate
- Unit Check
- Cyclic Diag
- Rear Camera
- In-line Diag