Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2006 >> CR-V 2WD L4-2.4L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Seat Occupant Sensor >> Service and Repair >> Front Passenger's Weight Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Passenger's Weight Sensor Replacement

Front Passenger's Weight Sensor Replacement

Removal

NOTE: Removal of the front passenger's weight sensors must be performed according to the precautions/procedures described at the beginning of SRS.

1. Disconnect the battery negative cable and wait at least 3 minutes before beginning work.
2. Remove the front passenger's seat assembly.
3. Remove the cushion cover/pad from the seat cushion frame.




4. Using a Torx T27 bit, remove the tamper-resistant Torx bolts (A) attaching the seat track (B) to the weight sensor (C).
5. Disconnect the sensors connectors (D) from the seat weight sensor unit, then remove the front passenger's weight sensors.

Installation

Be sure to install the harness wires so they are not pinched or interfering with other parts.




1. Install the new front passenger's weight sensors with Torx bolts (A) under the seat track.
2. Reassemble the front passenger's seat.
3. Reinstall the front passenger's seat.
4. Reconnect the battery negative cable.
5. Calibrate the front passenger's weight sensor unit.
6. After installing the front passenger's weight sensors, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come for about 6 seconds and then go off.
pro multis · About Operation CHARM