Stop Assembly
Tailgate Stop Assembly ReplacementNOTE:
- Take care not to scratch the tailgate.
- Put on gloves to protect your hands.
1. Remove the tailgate lower trim panel.
2. Disconnect the tailgate rod (A) at the lower end from the clip (B) of the tailgate latch.
NOTE: Check for damaged clips, and replace it if necessary.
3. Remove the bolts, then remove the tailgate stop assembly (A).
4. If necessary, disconnect the tailgate rod (B) from the tailgate stop assembly.
5. Install the stop assembly in the reverse order of removal, and note these items:
- Make sure the tailgate rod is connected securely. If you removed the tailgate rod from the tailgate stop assembly, adjust the rod when reinstalling it.
- Make sure the tailgate opens properly.