Gauge Control Module (Speedo) Trim

Gauge Control Module (Speedo) Trim Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program; call 888-424-6857

NOTE:
- Take care not to scratch the dashboard and related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.




1. Pry upon the inside edge of the gauge control module (speedo) trim (A) with a trim tool to detach the clips.




2. Using a trim tool, detach the clips, and release the hooks (A) and pins (B) along the edge of the gauge control module (speedo) trim (C), then remove the trim.
3. Install the trim in the reverse order of removal, and note these items:
- Check for damaged or stress-whitened clips, and if necessary, replace them with new ones.
- Push the clips into place securely.