Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2006 >> Element 2WD L4-2.4L >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Steering Wheel >> Service and Repair >> Steering Wheel Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Steering Wheel Installation

Steering Wheel Installation
1. Before installing the steering wheel, make sure the front wheels are aligned straight ahead, then center the cable reel (A). Do this by first rotating the cable reel clockwise until it stops. Then rotate it counterclockwise about two and a half turns. The arrow mark (B) on the cable reel label should point straight up.





2. Position the two tabs (A) of the turn signal canceling sleeve (B) as shown. Install the steering wheel on to the steering column shaft, making sure the steering wheel hub (C) engages the pins (D) of the cable reel and tabs of the canceling sleeve. Do not tap on the steering wheel or steering column shaft when installing the steering wheel.





3. Install the steering wheel bolt (A), and tighten it to the specified torque. Connect the horn switch connector (B), radio remote switch connector (C), and Set/decel, Resume/accel, Cancel switch connector (D). Make sure the wire harness is routed and fastened properly.





4. Install the driver's airbag, and confirm that the system is operating properly.
5. Do the power window control unit reset procedure.
6. Enter the anti-theft codes for the audio, then enter the customer's audio presets. Reset the clock.
7. Check the horn and turn signal canceling for proper operation.
pro multis · About Operation CHARM