Front Seat Armrest Replacement
Front Seat Armrest ReplacementSpecial Tools Required
KTC trim tool set SOJATP2O14
NOTE:
- Take care not to tear the seams or damage the seat covers.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
Normal
1. Using a trim tool, remove the cap (A).
2. Remove the armrest center pin (B), then remove the armrest (C). If necessary, remove the bushings (D) from the armrest.
3. Remove the armrest pins (E).
4. Install the armrest in the reverse order of removal.
- Make sure the bushings are installed properly.
- Make sure the cap is installed correctly.
Adjustable
1. Using a trim tool, remove the cap (A).
2. Remove the armrest center pin (B), then remove the armrest (C).
3. Install the armrest in the reverse order of removal, and make sure the cap is installed correctly.