Armrest Replacement

Rear Seat Armrest Replacement

NOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.

1. Remove the rear seat-back.




2. Remove the center headrest (A). Pinch the tabs on the ends of the headrest guides (B), and remove them from the seat-back.




3. Pull out the top of the armrest board (A), and then pull it up to release the hooks (B) from the frame wire (C) and to release the board from the armrest pivot brackets (D).




4. Remove the nuts, then remove the armrest (A).
5. Install the armrest in the reverse order of removal, and make sure the armrest board hooks are installed securely.