Seat Latch: Service and Repair
Rear Seat-back Latch ReplacementSpecial Tools Required
KTC trim tool set SOJATP2014 *
*Available through the American Honda Tool and Equipment Program.
2-door
NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to bend or scratch the interior trim.
1. Remove the rear bulkhead cover.
2. Disconnect the cylinder rod (A), remove the bolts, then remove the seat-back latch (B).
3. Install the latch in the reverse order of removal, and note these items:
- Make sure the cylinder rod is connected securely.
- Make sure the seat-back locks securely and unlocks properly.
Special Tools Required
KTC trim tool set SOJATP2014 *
*Available through the American Honda Tool and Equipment Program.
4-door
NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to bend or scratch the interior trim.
1. Remove these items:
- Rear door sill trim, both sides
- Seat side bolster, both sides
- Rear bulkhead cover
2. Disconnect the cylinder rod (A).
3. Remove the bolts, then remove the seat-back latch.
4. Install the latch in the reverse order of removal, and note these items:
- Make sure the cylinder rod is connected securely.
- Make sure the seat-back locks securely and unlocks properly.