Removal and Replacement
Alternator Removal and InstallationRemoval
1. Make sure you have the anti-theft code for the audio system and the navigation system (if equipped), then write down the XM radio presets.
2. Disconnect the negative cable from the battery first, then disconnect the positive cable.
3. Remove the drive belt.
4. Remove the drive belt auto-tensioner.
5. Remove the three bolts securing the alternator.
6. Disconnect the alternator connector (A), BLK wire (B), and harness clamp (C) from the alternator, then remove the alternator.
Installation
1. Connector the alternator connector (A), BLK wire (B), and harness clamp (C) to the alternator.
2. Tighten the three bolts securing the alternator.
3. Install the drive belt auto-tensioner.
4. Install the drive belt.
5. Connect the positive cable to the battery first, then connect the negative cable.
6. Enter the anti-theft code for the audio system and the navigation system (if equipped), then enter the XM radio presets.
7. Set the clock.