Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2007 >> Civic L4-1.8L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Pressure Regulating Solenoid >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Pressure Regulating Solenoid: Service and Repair

A/T Clutch Pressure Control Solenoid Valve A Replacement
1. Remove the air cleaner assembly and the air intake duct.
2. Remove the mounting bolts securing the harness cover (A), and remove the harness clamp (B).





3. Disconnect the A/T clutch pressure control solenoid valve A connector.
4. Remove the mounting bolts and A/T clutch pressure control solenoid valve A.





5. Remove the ATF pipe (B), ATF joint pipes (C), O-rings (D), and gasket (E).
6. Check the fluid passage of the A/T clutch pressure control solenoid valve for dust or dirt, and clean the passage.
7. Install a new gasket on the transmission housing, and install the ATF pipe and ATF joint pipes.
8. Install a new O-rings over the ATF joint pipes.
9. Install A/T clutch pressure control solenoid valve A.
10. Check the A/T clutch pressure control solenoid valve A connector for rust, dirt, or oil, then connect the connector securely.
11. Secure the harness cover with the mounting bolts, and install the harness clamp.
12. Install the air intake duct and the air cleaner assembly.
pro multis · About Operation CHARM