Hatch Latch Replacement

Hatch Latch Replacement

NOTE: Put on gloves to protect your hands.

1. Remove the hatch trim panel.




2. Disconnect the hatch opener cable (A), cylinder rod (B), hatch latch actuator connector (C), and hatch latch switch connector (D), and detach the connector.
3. Remove the bolts, then remove the hatch latch (E).
4. Install the hatch latch in the reverse order of removal, and note these items:
- Make sure the connectors are plugged in properly and the opener cable is connected properly.
- Make sure the opener cable actuates the latch before you close the hatch.
- Make sure the hatch opens properly and locks securely.