Passenger Assist Handle: Service and Repair

Grab Handle Removal/Installation

Special Tools Required

KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program

NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.




1. Remove the caps (A). Remove the screws, then remove the grab handle (B).




2. Install the grab handle in the reverse order of removal, and note these items:
- If the side curtain airbag has deployed, replace the grab handles with new ones.
- To prevent the side curtain airbags from deploying improperly and possibly causing injury, inspect removed grab handle and replace it if it has any deformations in the grab handle (A).