Third Row Seat Pivot
Third Row Seat Pivot Removal/InstallationSpecial Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE: Take care not to scratch the interior trim and body or tear the seat covers.
Center
1. Remove bolt of the third row seats.
2. Remove the bolts, then remove the center pivot (A).
3. Install the pivot in the reverse order of removal.
Outer
1. Remove the third row seat.
CAUTION: Be sure a stopper plate (P/N 82217-SHJ-A01) is fully inserted onto the outer pivot shaft before removing the seat; otherwise, the seat may spring open forcefully.
2. Remove the rear side trim panel.
3. Remove the bolts, then remove the seat outer pivot (A).
NOTE: Do not remove the stopper plate from the outer pivot (B) until the seat is reinstalled.
4. Install the pivot in the reverse order of removal, and note these items.
- Do not remove the stopper plate from the outer pivot until the seat is reinstalled.
- If the stopper plate has been removed during disassembly, bolt the pivot base (A) to the body, and make sure the return springs (B) are hooked on the pivot base plate (C). Rotate the pivot bracket (D), and then reinstall the stopper plate (E) on the pivot shaft.