Sliding Door Window Glass Weatherstrip: Service and Repair

Sliding Door Glass Outer Weatherstrip Replacement

NOTE:
- Once you remove the door glass outer weatherstrip, replace it with a new one because it will bend during removal.
- Put on gloves to protect your hands.
- Take care not to scratch the door.

1. Remove the door panel.




2. Remove the screw and sealing washer from the rear edge of the door.




3. Starting at the front, pull the door glass outer weatherstrip (A) up at each portion where the inner molding (B) catches the inside edge of the window slot.




4. First slide the door glass outer weatherstrip (A) forward slightly, detach the clip (B) by pulling the front of the weatherstrip up, then slide the weatherstrip forward to remove it.
5. Install a new weatherstrip in the reverse order of removal.